unisonic technologies co., ltd 2sb1116/a pnp silicon transistor www.unisonic.com.tw 1 of 4 copyright ? 2008 unisonic technologies co., ltd qw-r201-066.b pnp epitaxial silicon transistor ? description complement to utc 2sd1616/a ? ordering information ordering number pin assignment normal lead free halogen free package 1 2 3 packing 2SB1116-X-T92-B 2sb1116l-x-t92-b 2sb1116g-x-t92-b to-92 e c b tape box 2sb1116-x-t92-k 2sb1116l-x-t92-k 2sb1116g-x-t92-k to-92 e c b bulk 2sb1116a-x-t92-b 2sb1116al-x-t92-b 2sb1116ag-x-t92-b to-92 e c b tape box 2sb1116a-x-t92-k 2sb1116al-x-t92-k 2sb1116ag-x-t92-k to-92 e c b bulk
2sb1116/a pnp si licon transistor unisonic technologies co., ltd 2 of 4 www.unisonic.com.tw qw-r201-066.b ? absolute maximum ratings (t a =25 ,unless otherwise specified ) parameter symbol ratings unit 2sb1116 -60 collector to base voltage 2sb1116a v cbo -80 v 2sb1116 -50 collector to emitter voltage 2sb1116a v ceo -60 v emitter to base voltage v ebo -6 v dc i c -1 a collector current pulse(note2) i cm -2 a total power dissipation p c 0.75 mw junction temperature t j +150 c operating temperature t opr -20 ~ +85 storage temperature t stg -55 ~ +150 c note: 1. absolute maximum ratings are those values be yond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. pulse width Q 10ms, duty cycle Q 50% ? electrical characteristics (t a =25 c, unless otherwise specified.) parameter symbol test conditions min typ max unit collector-emitter satura tion voltage(note) v ce(sat) i c =-1a, i b =-50ma -0.2 v base-emitter saturati on voltage(note) v be(sat) i c =-1a, i b =-50ma -0.9 -1.2 v base emitter on voltage(note) v be(on) v ce =-2v, i c =-50ma -600 -650 -700 mv collector cut-off current i cbo v cb =-60v, i e =0 -100 na emitter cut-off current i ebo v eb =-6v, i c =0 -100 na 2sb1116 135 600 h fe1 v ce =-2v, i c =-100ma 2sb1116a 135 400 dc current gain(note) h fe2 v ce =-2v, i c =-1a 81 transition frequency f t v ce =-2v, i c =-100ma 70 120 mhz output capacitance c ob v cb =-10v, i e =0, f=1mhz 25 pf turn on time t on v cc =-10v, i c =-100ma i b1 =-i b2 =-10ma, v be(off) =2 ~ 3v 0.07 s storage time t stg 0.7 s fall time t f 0.07 s note: pulse test: pulse width Q 350 s, duty cycle 2% Q ? classification of h fe1 rank y g l hfe1 135 ~ 270 200 ~ 400 300 600
2sb1116/a pnp si licon transistor unisonic technologies co., ltd 3 of 4 www.unisonic.com.tw qw-r201-066.b ? typical characteristics static characteristic collector current, ic (ma) -100 0 -2 -4 -6 -10 -8 -80 -60 -40 -20 collector-emitter voltage, v ce (v) i b =-200 a i b =-150 a i b =-100 a i b =-50 a 0 static characteristic -1.0 0.0 -0.2 -0.4 -0.6 -1.0 -0.8 -0.8 -0.6 -0.4 -0.2 i b =-3.0ma i b =-2.5ma ib=-1.5ma i b =-0.5ma 0.0 i b =-1.0ma i b = - 2 . 0 m a i b = - 3 . 5 m a i b =-5.0ma collector-emitt er voltage, v ce (v) collector current, ic (a) i b =-250 a i b =-4.5ma i b =-4.0ma dc current gain dc current gain, h fe 1000 1 -0.1 -1 -10 100 10 collector current, ic (ma) -0.01 v ce =-2v base-emitter saturation voltage collector-emitter sa turation voltage saturation voltage, v be(sat) , v ce(sat) (v) -10 -0.01 -0.1 -1 -10 -1 -0.1 -0.01 v be(sat) v ce(sat) i c =20i b collector current, i c (a) time, t on , t stg , t f ( s) capacitance, c ob (pf)
2sb1116/a pnp si licon transistor unisonic technologies co., ltd 4 of 4 www.unisonic.com.tw qw-r201-066.b ? typical characteristics(cont.) current gain bandwidth product 1000 1 -0.1 -1 -10 100 10 collector current, i c (ma) -0.01 v ce =-2v safe operating area -10 -0.01 -10 -100 -1 -0.1 collector-emitter voltage, v ce (v) -1 200ms d c p w = 1 m s 1 0 m s power derating power dissipation, p c (w) 0.8 0.3 25 50 75 150 100 0.7 0.6 0.5 0.4 ambient temperature, ta ( ) 0 0.2 0.1 0.0 125 175 utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
